8792 Positioner

Digital electropneumatic positioner

  • Compact and robust design
  • Easy to start using tune function
  • Dynamic positioning system with no air consumption in controlled state
  • Optimized for high-pressure proportional valves of the MPG and HPG series
  • Version for quarter turn actuators (NAMUR) available

The robust and compact Bürkert positioner has been tailored for m-tech proportional valves with a remote stroke sensor. Operation is done via the external operation and display module with a backlit graphical display.

Material body
Aluminium plastic-coated
Operating voltages
24 V DC +/- 10 %
Residual ripple
max. 10 %
Setpoint setting
0/4 bis 20 mA and 0 bis 5/10 V
Input resistance
0/4 bis 20 mA: 180 Ω| 0 bis 5/10 V: 19 kΩ
Analogue feedback
4-20 mA, 0-20 mA| 0-10 V, 0-5 V
Binary input
Galvanically isolated, 0-5 V = log „0”, 10-30 V = log „1“
Pilot media
Neutral gases, air DIN ISO 8573-1
Dust concentration
Class 5 (<40 μm particle size)
Particle density
Class 5 (<10 mg/m³)
Pressure condensation point
Class 3 (<-20 °C)
Oil concentration
Class 5 (<25 mg/m³)
Ambient temperature
0 °C to + 60 °C
Pilot air ports
Threaded ports G 1/4
Supply pressure
6-7 bar
Air supply filter
Exchangeable (aperture size ~ 0,1 mm)
Einbaulage
as required, display above or sideways
Type of protection
IP65 and IP67 acc. to EN 60529
Cable gland
2xM20x1,5 (cable Ø10 mm) on screw terminals (0,14-1,5 mm²) 1xM12x1,5 (cable Ø3 to 6,5 mm)
Conformity
EMC directive 2004/108/EG
Considered standards
CAN/CSA-C22 2 Nr. 139 | UL 429
Weight
1 kg
Datasheet 8792 positioner